High Intensity Gas Infrared Heaters
Modular Burner Design
The Fostoria modular burner, with ceramic tile, delivers
high intensity radiant heating (approx. 1725° F) at the burner
surface. The radiant source consists of a serrated ceramic
surface with a minimum of 190 perforations per square inch.
Flame is concentrated at the tile, increasing the surface tem-
perature, and thus increasing radiant output,
while offering greater resistance to drafts and wind.
By utilizing individual venturis for each burner module,
each heater achieves nearly 100% combustion efficiency.
This reduces the amount of by-products left in the heated
space. The modular burner design allows all heaters, 20,000
through 120,000 BTU, to operate at their designed capacity
and rating.
Features:
 | CSA, Formerly Known as AGA, Certified Design |
| 6 BTU Sizes in Both Natural & LP Gas |
| Modular Burners - 20,000 / 17,500 BTUH per Burner |
| Designed 8°Angle of Combustion Surface |
| Horizontal to 20° Angle Mounting |
| .050" Bright Aluminum Reflector |
| Reinforced Corners |
| Easy Mounting via Chains & 'S' Hooks |
| 24V Operating Voltage - Eliminates Need to Run Wiring in Conduit |
Applications:
| Factories / Manufacturing Areas |
| Farm Buildings |
| Pre-Fab Metal Buildings |
| Warehouses |
| Loading Docks |
| Auto Service Garages |
| Gymnasiums / Auditoriums |
Typical Top View
Individual, high temperature cast aluminum burner body with steel venturI tubes to assure effective infrared throughout entire heater surface.
Bottom View
Each burner body receives an individual ceramic plaque, gasketed and held in place by a steel frame, greatly reducing ceramic replacement.
Section
8º angle built into each head, insures positive venting action of combustion gases. All units may be hung in angled position from 0°-20°.
| MODEL | BTU | FEUL TYPE | WEIGHT | PRICE |
| FL20 NESD | 20,000 | NATURAL GAS | 20 lbs. | 275.00 |
| FL40 NESD | 40,000 | NATURAL GAS | 28 lbs. | 295.00 |
| FL60 NESD | 60,000 | NATURAL GAS | 36 lbs. | 305.00 |
| FL80 NESD | 80,000 | NATURAL GAS | 44 lbs. | 374.00 |
| FL100 NESD | 100,000 | NATURAL GAS | 52 lbs. | 374.00 |
| FL 120 NESD | 120,000 | NATURAL GAS | 60 lbs. | 445.00 |
| FL20 NSG | 20,000 | NATURAL GAS | 20lbs. | 315.00 |
| FL40 NSG | 40,000 | NATURAL GAS | 28 lbs. | 335.00 |
| FL60 NSG | 60,000 | NATURAL GAS | 36 lbs. | 370.00 |
| FL80 NSG | 80,000 | NATURAL GAS | 44 lbs. | 425.00 |
| FL100 NSG | 100,000 | NATURAL GAS | 52 lbs. | 425.00 |
| FL120 NSG | 120,000 | NATURAL GAS | 60 lbs. | 475.00 |
Accessories: (call for Prices)
Chain Mounting Kit (Consists of (2) 8' Lengths of Chain and (4) 'S' Hooks)
24 Volt Thermostat - Model RK120EAA (24 Volt, Heat Only, 50°-90°
120 Voltage Control Kit (Consists of 120/24 Volt Transformer, Wiring Box with Cover and 8' Cordset. One Kit per Heater Required if Line Voltage Control of Heater is Desired)
120 Volt Thermostat - Model TW 141 (120 Volt, 22 amp, Single Pole, To Be Used with 120 Volt Control Kit)