Fostoria infrared gas heaters for industrial heating high intensity gas tube heaters radiant heating

877-676-1140 - Email

 
 

Industrial Cold Weather Climate Control

Cool Draft will help you layout a plan to heat your offices, warehouse or manufacturing facility. We have the capabilities and product line to heat any area.

Call for a free consultation.

Gas Infrared Tube Heaters From 10 to 80 Feet of Comfort



EZ straight heaters are available for shipping in individual tube lengths for 10 ft lengths for ease of installation and can be installed by one person. With over 30 engineered combinations and the use of 90 and 180 degree bends, you can put the heat precisely where you want it...no matter what the shape or size of the workplace. Installation and service is a snap. A 5 ft. cap and 3 wire cord for connection to 120 volt power supply.

Typical heating applications for gas-fired infrared heaters include manufacturing facilities, warehouses, aircraft hangers, vehicle maintenance shops, farm buildings, fire stations, restaurant patios, animal shelters, loading docks, and many more.

 

High Intensity Gas Infrared Heaters

High intensity gas infra-red ceramic heater

The modular burner, with ceramic tile, delivers high intensity radiant heating (approx. 1725° F) at the burner surface. The radiant source consists of a serrated ceramic surface with a minimum of 190 perforations per square inch.

Flame is concentrated at the tile, increasing the surface temperature, and thus increasing radiant output,

while offering greater resistance to drafts and wind. By utilizing individual ventures for each burner module, each heater achieves nearly 100% combustion efficiency.

This reduces the amount of by-products left in the heated space. The modular burner design allows all heaters, 20,000

through 120,000 BTU, to operate at their designed capacity and rating.

Call For Prices & Sizes

 

Heat Wave Portable Electric Salamander

The Fostoria Heat Wave is safe, easy to operate, and saves valuable time on any job site. This odorless, flameless, portable electric heater provides the climate control you need for interior jobs without wasting time refueling. Even better, the popular " Salamander " models eliminate the need for dangerous fuel storage or the threat of poisoning from combustion by-products. Operation is simple; the Heat Wave's 800 CFM fan pushes ambient air over multiple heat coils while also recirculating air within the room until it reaches the temperature level set with the unit's thermostat. Unlike fuel-fired heaters, the Heat-Wave can be left unattended and is safe to use indoors for any task.

Features

bulletSafety yellow heater enclosure
bulletSafety screens on air intake / output openings
bulletLong-life finned tubular heating elements
bulletThermostat adjustment: 40 - 100 degrees Farenheit
bulletHigh-limit thermal cutout switch
bulletMagnetic contactor
bulletCFM ratings: 800 CFM / 10 kW
bulletHeat capacity: 34,130 btu / 42 amps / 240 volts
bulletNet Weight: 60 lbs
bulletPhase 1
bulletStraight blade range plug for use with standard range outlet

                6 Models To Choose From:

FES-1520-3A           FES-1524-1A

FES-1524-SE           FES-1548-3E

FES-3048-3A           FES-1024-1CA

 

Portable 5,120 BTU Baseboard Convection Heater

The Portable Baseboard Convection Heater is the perfect way to add warmth to any room in your house during those cold days and nights! This unique 483 TM model electric heater has a temperature control thermostat that adjusts for maximum comfort and a power indicator light to make for easy access in dark, hard-to-reach places. The baseboard convection heater also features a manual reset type limit control to help ensure safe operation for any user.

Features

bullet

Temperature control thermostat

bullet

1500w power setting

bullet

Manual reset type limit control

bullet

Max heat capacity: 5120 btu / 120 volts

bullet

Overall dimensions: 5.25 " H x 48 " W x 7.5 " D

bullet

Net Weight: 13 lbs

bullet

Phase 1

bullet

6 ' long - 3 conductor cord included

 

2000 Watt Heavy Duty Commercial Electric 96 " Baseboard Convection Heater

The Heavy Duty Electric Baseboard Convection Heater is a fantastic way to add warmth and comfort to any room in your home without spending a fortune. This baseboard convection model features top quality stainless steel heating elements and aluminum fins, and can be permanently mounted to a wall by using the key hole knockouts that are placed 4 " apart on the back of the heater. Available in a commercial Bankers bronze finish, the electric baseboard heater offers an over-temperature thermal limit that extends the entire length of the unit, as well as a full length wireway along the back to ensure safety. The painted 22 ga. steel front has 20 ga. junction boxes located on each end that contain quick connect cable clamps and 6 " ground lead wires.

Features

bullet

Commercial Bankers bronze finish

bullet

Stainless steel heating element and aluminum fins

bullet

Over-temperature thermal limit

bullet

Full length protective wireway

bullet

Standard inlet / outlet wire guards

bullet

Painted 22 ga. steel front w / 20 ga. junction boxes

bullet

Quick connect cable clamps and 6 " ground lead wires

bullet

Heating capacity: 6,826 btu / 2,000 w ( *G2915 option: 5,100 btu / 1,500 w )

bullet

Net Weight: 25 lbs

Also Available In:

1500 Watt       1750 Watt       2000 Watt       2500 Watt

 

 


 

Cool Draft Main Products

   

 

 
Misting Fans
 
Heaters

 
Evaporative Cooling
 
Ventilation Fans

 
Industrial Portable Lights
 
Confined Space Blowers

 

 

Low Intensity Tube Heaters

 

10' to 80'

Extremely Effective

Our Tube Heaters operate on the same principle as the sun warming the earth. The result is quiet, soft, radiant heat with no drafts.

Heat the floor zone, not the ceiling.

Economical

Our Tube Heaters can reduce your heating bill 20% to 50%. The system can pay for itself in a few short years. Heaters are easy to install and require very little maintenance.

 


 

 


 

We Have Unbeatable Prices!

We'll beat any advertised price!

Call for Details & Prices

 

 

Commercial Surface Mounted 10,200 BTU Ceiling Heater

3 Models to Choose From

The Commercial Recess Mounted Ceiling Heater is a great way to add warmth to any office or industrial space! Featuring a white powder coated 20 ga. grill and enclosed steel fin sheath element, the commercial recess model is safe and easy to use. The 1300 RPM propeller style fan blade projects an airflow of up to 425 CFM to allow for even heat distribution. The entire unit also features a radial diffuser and reset thermal limit.

Features

bulletWhite powder coated 20 ga. grill
bulletRadial diffuser
bulletEnclosed steel fin sheath element
bulletPropellor style fan blade: 1300 RPM / 425 CFM
bulletHeat capacity: 10,200 btu
bulletTemperature rise: 22 degrees F
bulletNet Weight: 50 lbs
bullet**208v / 240v / 277v units have manual reset thermal limit
bullet**480v unit has automatic reset thermal limit

 

Outdoor / Indoor Rated Quartz Tube Infrared Heater

The Outdoor / Indoor Rated Quartz Tube Infrared Heater is a great way to add warmth to any industrial space during those cold days and nights! Outdoor spot heating for patio areas, bus shelters, smoking areas, and indoor spot heating for over workstations, lobby entrance ways, and vestible areas. Features coilzack bright aluminum reflector and end caps, frosted quartz tube heating element, 60 degree symmetric heat pattern, and either high-temp brown powder coated finish or corossosion resistant stainless steel 24-gauge housing. UL/C-UL listed for suspended, totally eposed (outdoor) and indoor spot heating applications

 

Multi - Watt Fan Forced Unit Heater

The Multi - Watt Fan Forced Unit Heater is a great way to add warmth to any industrial space during those cold days and nights! Featuring a totally enclosed single phase, permanently lubricated, thermally protected motor, this exceptional heating unit is mounted with rubber insulators to minimize vibration and noise. The block finned steel element and automatically resetting over-heat limit control combine to make this unit both efficient and safe to use. The heavy gauge welded steel cabinet has a powder coated finish, as well as a control compartment with a hinged and latched access door.

 

 

Low Profile 240v Fan Forced Wall Heater w/ Wall Box

The Low Profile Fan Forced Wall Heater is a perfect way to add heat to any room in your home during those cold days and nights! Featuring a powder coated 20 ga. steel front, this exceptional heater can be used with either a line voltage wall thermostat or a separate field installed thermostat. The manual reset thermal limit and finned tubular steel element combine to make this heater both safe and efficient for any household. A 2200 RPM propeller style fan blade projects an airflow of up to 70 CFM to allow for even heat distribution, and the entire unit can be positioned to allow for left, right, or top discharge. Available in an ivory finish or white finish.

 

Radiant Cove Heaters - several models

The Radiant Cove Heater provides both focused infrared rays and downward directional heating above windows, glass walls, or bathroom mirrors. Featuring a high temperature white powder coated finish on 14 ga. extruded aluminum, the cove unit also has a sawtooth surface that increases the radiating area up to 45% . The aluminum heating element is bonded to an extruded aluminum reflector, and the entire unit includes wall mounting brackets for easy installation

Features

bullet14 ga. extruded aluminum construction
bulletHigh temperature powder coated finish
bulletAluminum heating element bonded to extruded aluminum reflector
bulletSawtooth surface
bulletWall mounting brackets
bulletNet Weight: 19 lbs

 

   


 

  
   

Cool Draft Scientific LLC.   2007.  All rights reserved.