Effective

Our Tube Heaters operate on the same

principle as the sun warming the earth. The

result is quiet, soft, radiant heat with no drafts.

Heat the floor zone, not the ceiling.

Economical

Our Tube Heaters can reduce your heating bill 20% to 50%.

The system can pay for itself in a few short years. Heaters

are easy to install and require very little maintenance.

System Features:

· CSA Design Certified (Formerly A.G.A.)

· Straight, U, or L-Shaped Systems

· Versatile - 8 BTU/H Inputs / 15 Tube Lengths

· Minimal Field Assembly

Burner:

· 40-200 MBTU/H (N or LP gas)

· 120 V controls with Hot Surface Ignition and 100% Safety Lockout

· Single Pressure Switch Operation

· Enclosed Blower (fan with Thermal Overload Protection and Balanced Air Rotor)

· Outside Combustion Air Collar

· Corrosion Resistant Powder-Coated Enclosure

· Operational Indicator Lights

· Site Lens for Viewing Flame / Glow Bar Operation

· High Altitude Models (75-150MBTU/H)

Heat Exchanger & Reflector:

· 16 ga. / 4” Alumi-therm Steel Combustion Chamber (1st 10’ or 20’)

· 16 ga. / 4” Hot Rolled Black Steel Emitter Tube(s)

· Optional 16 ga. / 4” Aluminized Black Coated

· Emitter Tube(s)

· Aluminized Steel Turbulator Baffle for Max. Efficiency

· Milled Aluminum Reflectors Individually Adjustable to 45°

· Reflector End Caps for Increased Efficiency

· Wire Form Hangers that Open for Ease of Installation

* Mounting Chains and S-Hooks Included (Allows for 2’ Suspension)

STRAIGHT TUBE

MODEL	BTU	TUBE LENGTH	WEIGHT	PRICE
FTH 40 N 10	40,000	10'	78 lbs.	call
FTH 60 N 20	60,000	20'	110 lbs.
FTH 75 N 30	75,000	30'	158 lbs.
FTH 100 N 30	100,000	30'	158 lbs.
FTH 125 N 50	125,000	50'	241 lbs.
FTH 150 N 50	150,000	50'	241 lbs.
FTH 175 N 60	175,000	60'	273 lbs.
FTH 200 N 70	200,000	70'	321 lbs.

U-TUBE

MODEL	BTU	TUBE LENGTH	WEIGHT	PRICE
FUT 60 N 20	60,000	20'	124 lbs.	call
FUT 75 N 30	75,000	30'	172 lbs.
FUT 100 N 40	100,000	40'	204 lbs.
FUT 125 N 50	125,000	50'	255 lbs.
FUT 150 N 50	150,000	50'	255 lbs.
FUT 175 N 60	175,000	60'	287 lbs.
FUT 200 N 70	200,000	70'	335 lbs.

TUBE HEATER ACCESSORIES (call for prices)

· Chain Mounting Kit, (item # 8886000) (Consists of (2) 8' Chains & (4) 'S' Hooks)

· Flexible Gas Supply Hose, (item # 4321414) (24" Stainless Steel without Shutoff Valve)

· Side Wall Vent Kit, (item# 8886200) (Consists of Type “B” Draft Hood Connector, Vent Cap, Wall Thimble and 18" Length Vent Pipe)

· Roof Vent Kit, (item # 8886700) (Consists of Type “B” Vent Cap, Roof Flashing, Storm Collar and 12" Length Vent Pipe)

· Unvented Outlet Cap, (item # 8886300) (4" O.D. with Flapper)

· Inlet Cap, (item # 8886400) (4" O.D. with Bird Screen for Outside Combustion Air)

· 90° Elbow Kit, (item # 8880000) (90° Elbow, Coupler & 2 End Caps)

· Line Voltage Thermostat - Model TW141, (item # 2609802) (120 Volt, Single Pole, 22 amps)

· 24V Control Kit

· Reflector End Caps (Qty. 2), (item # 8880200)

©2001-2005 Cool Draft Scientific. (CDS) All content is the property of (CDS). Any reproduction or storage of any information on this site without the written permission of (CDS) is in violation of US Copyright laws. info@cooldraft.com